Environmental Testing
Environmental testing is the measurement of the performance of equipment under specified environmental conditions, such as:
· extremely high and low temperatures
· large, swift variations in temperature
· blown and settling sand and dust
· salt spray and salt fog
· very high or low humidity
· wet environments, waterproofness, icing
· presence of corrosive material
· fungus, fluids susceptibility
· vibrations (airborne and structural), gun fire
· accelerations
· solar radiation
· high and low pressures (especially for aeronautical and space equipment)
· operating at angles (especially for marine, aeronautical and space equipment)
· electromagnetic interference (EMI), ESD, Lightning
· acoustic measurements
· power input variations
Such tests are most commonly performed on equipment used in military, maritime, aeronautical and space applications.
The demand for quality products is also increasing. Malfunctioning of Product threaten a company’s reputation. In an increasingly competitive industry, there is no room for mishaps; all system components should function properly to guarantee safety for the Product life cycle. If you are looking for a Top Environment Testing Lab for you product in Delhi India then Matrix Test Lab is a name of trust for Environment Testing services in India. To improve the quality of the product & to cope-up the demand, MTL initiated Environment testing services to provide reliable & efficient testing services to esteemed clients as per National & International protocol.
We at MTL, provide complete automotive testing solution ranges from Electrical/Mechanical safety testing to Environmental Testing to ensure, safe and reliable products.
If you are looking for a Top Environmental Testing service for you product in Delhi, India then Matrix Test Lab is a name of trust for Environmental Testing service in India. To improve the quality of the product & to cope-up the demand, MTL initiated for Environmental Testing service to provide reliable & efficient testing services to esteemed clients as per National & International protocol.
| S. NO. | GROUP NAME | PRODUCT NAME | TEST NAME | STANDARD |
| 1 | Environmental Test Facility | Electronic & Electrical Equipment | Bump Test | IS 9000 (Part VII/ Sec 2) |
| 2 | Change of Temperature | IS 9000 (Part XIV/Sec II) | ||
| 3 | Damp Heat (Cyclic) Test | IS 9000 (Part V/Sec 1 and 2 | ||
| 4 | Damp Heat (Steady State) Test | IS 9000 (Part IV) | ||
| 5 | Dry Heat Test | IS 9000 (Part III/Sec 1 to 5) | ||
| 6 | Dust Test | IS 9000 (Part XII), Procedure 3 | ||
| 7 | Salt Mist Procedure 3 | IS 9000 (Part XI) | ||
| 8 | Vibration ( sinusoidal) Test | IS 9000 (Part VIII) | ||
| 9 | Cold test | IEC 60068-2-1 | ||
| 10 | Damp Heat (Steady State) Test | IEC 60068-2-30 | ||
| 11 | Damp Heat Test (Cyclic) | IEC 60068-2-30 | ||
| 12 | Dry Heat Test | IEC 60068-2-2 | ||
| 13 | Vibration Test | IEC 60068-2-6 | ||
| 14 | Bump Test | Test Number 5, JSS 55555 | ||
| 15 | Corrosion (Alkaline) | Test Number 8, JSS 55555 | ||
| 16 | Corrosion (Salt/ Salt Fog) | Test Number 9, JSS 55555 | ||
| 17 | Damp Heat | Test Number 10, JSS 55555 | ||
| 18 | Drop | Test Number 13, JSS 55555 | ||
| 19 | High Temperature | Test Number 17, JSS 55555 | ||
| 20 | Immersion | Test Number 19, JSS 55555 | ||
| 21 | Low Temperature | Test Number 20, JSS 55555 | ||
| 22 | Rapid temperature Cycling (Thermal shock) | Test Number 22, JSS 55555 | ||
| 23 | Toppling | Test Number 26, JSS 55555 | ||
| 24 | Tropical Exposure | Test Number 27, JSS 55555 | ||
| 25 | Vibration | Test Number 28, JSS 55555 | ||
| 26 | Humidity | Method 103B MIL-STD-202G | ||
| 27 | Immersion | Method 104A MIL-STD-202G | ||
| 28 | Vibration | Method 201A MIL-STD-202G | ||
| 29 | Humidity | Method 507.5 MIL-STD-810H | ||
| 30 | Immersion | Method 512.5 MIL-STD-810H | ||
| 31 | Low Temperature | Method 502.5 MIL-STD-810H | ||
| 32 | Salt Fog | Method 509.5 MIL-STD-810H | ||
| 33 | Temperature Shock | Method 503.5 MIL-STD-810H | ||
| 34 | Vibration | Method 514.6 MIL-STD-810H | ||
| 35 | High Temperature | Method 501.5 MIL-STD-810H | ||
| 36 | Environmental Test Facility | Telecommunication Equipment | Bump Road Ability Test No. 13 | QM-333 Section 3 |
| 37 | Corrosion Salt Test No. 9 | QM-333 Section 3 | ||
| 38 | Drop Test No. 10 | QM-333 Section 3 | ||
| 39 | Dust Test No. 15 | QM-333 Section 3 | ||
| 40 | Fall Test No. 12 | QM-333 Section 3 | ||
| 41 | High Temperature (Dry Heat) Cycle Test No. 2 | QM 333 | ||
| 42 | Low Temperature (Cold) Cycle Test No.1 | QM 333 | ||
| 43 | Rain Test No. 14 | QM-333 Section 3 | ||
| 44 | Rapid temperature cycling Test No. 4 | QM-333 Section 3 | ||
| 45 | Sealing - Gas Tightness High Altitude Test No. 7 (Procedure 3) | QM-333 Section 3 | ||
| 46 | Topple Test No. 11 | QM-333 Section 3 | ||
| 47 | Tropical Exposure (Damp Heat) Cycle Test No. 3 | QM-333 | ||
| 48 | Vibration Test No. 6 | QM-333 Section 3 | ||
| 49 | Water Immersion Test No. 8 | QM-333 Section 3 | ||
| 50 | Damp Heat (Steady State) Test No. 5 | QM-333 Section 3 |